Return to the IUPUI Main Page

  Quick Jump:
 

AEML
  Mission     People     Training      Research       Publications    Projects     Facilities     Products      Links

you are here: ME Dept. Home » Research Labs » AEML » Publications

Publications :

Journal/Conference Papers

1.

El-Mounayri, H.; Spence A. D. and Elbestawi, M. A., "Milling Process Simulator: A Generic Solid Modeler Based Paradigm", Journal of Manufacturing Science and Engineering, ASME, Vol. 120, n 2, May 1998, pp. 213-221.

 

2.

J. Zhang, J. Chen and H. El-Mounayri, "PDM Based Virtual Product Template for Optimum Design and Manufacturing", Submitted to the 7th Cairo University International Conference on Mechanical Design & Production, February 15-17, 2000, Cairo, Egypt.

 

3.

H. El-Mounayri, H. Kishawy & J. Brineni, " Optimization of CNC Ball End Milling: A Nueral Network-based Model", accepted for publication in the Journal of Materials Processing Technology, May 2004.

 

4.

H. El-Mounayri, J. Briceno, and M. Gadallah," A New Artificial Neural Network Approach to Modeling Ball-End Milling", International Journal of Advanced Manufacturing Technology, 2003.

 

5.

H. El-Mounayri, J, Briceno, and M. Gadallah," A New Artificial Neural Network Approach to Modeling Ball-End Milling", International Journal of Advanced Manufacturing Technology. 2002

 

6.

V. Tandon, H. El-Mounayri, and H. Kishawy," NC End Milling Optimization Using Evolutionary Computation", International Journal of Machine Tools and Manufacture, v.42, pp.595-605, 2002

 

7.

H. El-Mounayri, H. Kishawy, and V. Tandon**," Optimized CNC End Milling: A Pratical Approach", International Journal of Computer Integrated Manufacturing, v. 15, pp. 453-470, 2002.

 

8.

H. El-Mounayri, M. Gadallah, and J. Briceno**," Enhanced Modeling and Optimization of Milling Using Hybrid Techniques", Transactions of the CSME (Canadian Society for Mechanical Engineering), v. 26, No. 2, pp. 179-199, 2002.

 

9.

J. Briceno, H. El-Mounayri, and S. Mukhopadhyay," Selecting and Artificial Neural Network for Efficient Modeling and Accurate Simulation of the Milling Process", International Journal of machine Tools and Manufacture, v. 42, pp. 663-674, 2002

 

10.

M. Gadallah and H. El-Mounayri, " Exhaustive Search Approximation in Design Optimization - An Algorithmic Implementation", Transactions of the CSME (Canadian Society for Mechanical Engineering) v. 26, No. 2, pp. 201-218, 2002.

 

11.

V. Tandon and H. El-Mounayri," A Novel Artificial Neural Newworks Force Model for End Milling", International Journal of Advanced Manufacturing Technology, v. 18, pp. 693-700, 2001.

 

12.

Haiyan Deng, Hazim El-Mounayri, and Daniel K. Aw" A Generic Approach for Optimization of End Milling using Solid Modeling and Neural Network", 2nd International Industrial Engineering Conference, IIEC, 2004.

 

13.

El-Mounayri, D. Aw, T. Wasfy, and A. Wasfy " Virtual CNC machining: A Comprehensive Approach", ICC&IE 2005, Istanbul, Turkey, June 2005.

 

14.

T. Wasfy, A. Wasfy, H. El-Mounayri, and D. Aw;" Virtual Training Environment for 3-axis CNC Milling Machine", 25th Computers and Information in Engineering (CIE) Conference (DETC2005), September 24-28, 2005. Winner of Best paper award 'Applications'.

 

15.

A. Wasfy, T. Wasfy, H. El-Mounayri, and D. Aw; " Web-based Multi-Media Lecture Delivery System with Text-to-Speech and Virtual Instructors", 25th Computers and Information in Engineering (CIE) Conference (DETC2005), September 24-28, 2005.

 

16.

H. El-Mounayri, H. Gadallah, and H. Briceno, " Optimized CNC End Milling Using Computational Intelligence", International Conference on Industrial Engineering and Product Management (IEPM'2003).

 

17.

Deng H. and El-Mounayri H.," An Integrated Process Simulation System for End Milling", accepted for publication at the MDP-8 International conference for Design and Production, January 4-6, 2004. Paper published in proceedings.

 

18.

H. A. Kishawy, H. El-Mounayri, A. I. El-Wahab and Y. Zhang " Characteristics of High Speed Machining of Difficult-to-Cut Materials with Self-Propelled Rotary Tools", accepted for publication at the MDP-8 International conference for Design and Production, January 4-6, 2004. Paper published in proceedings.

 

19.

Hazim El-Mounayri, Zakir Dugla, and Haiyan Deng, " Prediction of Surface Roughness in End Milling Using Swarm Intelligence", IEEE, Indianapolis, IN, 2003.

 

20.

H. El-Mounayri, H. Deng and S. Mukhopadhyay," A Neural Network Model for Intefrated Modeling and Optimization of CNC End Milling", submitted to NAMRCXXXI, McMaster University, Hamilton, ON, Canada, May 20-23, 2003. Paper was published in proceedings.

 

21.

Z. Dugla, H. El-Mounayri, and M. Gadallah" Accuracy Prediction in Flat End Milling Using Neural Network Approach", submitted to NAMRCXXXI, McMaster University, Hamilton, ON, Canada, May 20-23, 2003, Paper Published in proceedings..

 

22.

H. El-Mounayri, Z. Dugla and H. Deng, " Predicting Surface Roughness in End Milling Using an Innovative Technique from Evolutionary Computation", accepted for presentation in Symposium on Advances to Further the Automation of Metal Removal Processes at the International mechanical Engineering Congress and Exposition (IMECE 2002), ASME, Nov. 2002.

 

23.

H. El-Mounayri, J. Briceno, and M. Gadallah, " Prediction of Forces in Ball-end milling Using RBF Neural Networks", Transactions of NAMRI/SME, Volume XXX, pp. 313-320, 2002.

 

24.

H. El-Mounayri and V. Tandon," An AI-based Model for Predicting Instantaneous Cutting Force in End Milling", accepted for presentation in Symposium on Process planning and Process Optimization at the International Mechanical Engineering Congress and Exposition (IMECE 2002), Nov 2002.

 

25.

M. Gadallah and H. El-Mounayri, " Modeling for Optimization (MO-OP): Tools for Manufacturing and Design Engineering Problems", Proceedings of DETC'01 ASME 2001 Design Engineering Technical Conference and Computers and Information in Engineering Conference, Pittsburg, PA, September 9-12, 2001.

 

26.

B. June, R. Pidaparti, and H. El-Mounayri," Bending Failure Behavior Recycled Aluminum Reinforced Composites", 2001 ASME International MechanicalEngineering Congress and Exposition, New York, Nov. 11-16, 2001.

 

27.

H. Kishawy, A. El-Wahab, and H. ElMounayri," On the Effect of Rake Angle and Edge Preparation during Machining - A Finite Element Modeling and Analysis", 7th International Conference on Prodution Engineering, Design and Control, February 13-15, 2001.

 

28.

H. El-Mounayri, H. Deng, and S. Mukhopadhyay," A Neural network Model for Integrated Modeling and Optimization of CNC End Milling", submitted to NAMRCXXXI, McMaster University, Hamilton, ON, Canada, May 20-23, 2003.

 

29.

Z. Dugla and H. El-Mounayri," Accuracy Prediction in Flat End Milling Using Neural Network Approach", submitted to NAMRCXXXI, McMaster University, Hamilton, ON, Canada, May 20-23, 2003.

 

30.

H. El-Mounayri, H. Kishawy, H. Deng," An Integrated Approach for Optimized CNC End Milling", submitted to the 3rd Assiut University International Conference on Mechanical Engineering Advanced Technology for Industrial Production (MEATIP3), December 24-26 2002 (Abstract accepted).

 

31.

V. Tandon and H. El-Mounayri," Closing the Gap between Pro/E and CNC Manufacturing", 2000 Pro/USER International Conference, Orlando Florida, USA, June 18-21, 2000.

 

32.

H. A. Kishawy, H. El-Mounayri, A.I. El-Wahab and y. Zhang," Characteristics of High Speed Machining of Difficult-to-Cut Materials with Self-Propelled Rotary Tools", accepted for publication at the MDP-8 International conference for Design and Production, January 4-6, 2004.

 

33.

Deng H. and El-Mounayri H.," An Integrated Process Simulation System for End Milling", accepted for publication at the MDP-8 International Conference for Design and Production, January 4-6, 2004.

 

34.

H. El-Mounayri, Daniel Aw, Tamer Wasfy and Ayman Wasfy," Virtual Advanced Manufacturing Laboratory for Training and Education", 2005 ASEE Annual Conference, Portland, OR.

 

35.

H. El-Mounayriand N. Lamm, " Introducing Problem-based Learning in a Modular Freshman Course", IL/IN ASEE Aectional Conference, pp. 61-66, 2002.

 

36.

J. Zhang, J. Chen and H. El-Mounayri, " A Generic Template for Collaborative Product Development", Accepted for presentation at the Symposium on Virtual Environment for Manufacturing at the International Mechanical Engineering Congress and Exposition (IMECE), Nov. 14-19, 1999, Nashville, Tennessee.

 

37.

H. El-Mounayri, J. Zhang, and J. Chen, " PDM based system for Manufacturing Process Analysis and Optimization", Accepted for presentation at the Electrical Manufacturing and Coil Winding 9 Conference, October 26-28, 1999, Cincinnati, Ohio.

 

38.

Vipul Tandon and Hazim El-Mounayri, " Aspects of Integrated CAD/CAM for Advanced Manufacturing", Accepted for presentation at the Electrical Manufacturing and Coil Winding 9 Conference, October 26-28, 1999, Cincinnati, Ohio.

 

39.

Lim Kwok and Hazim El-Mounayri, " CAD/CAM-based Geometric Modeling Simulation for Virtual Manufacturing", Submitted for presentation at the Electrical Manufacturing and Coil Winding 9 Conference, October 26-28, 1999, Cincinnati, Ohio.

 

40.

Chen, J., Chen, Y., Chien, Y.P., Zhang, R., and Zhang, D., "Virtual Prototyping in Concurrent Engineering Design", International Conference on Manufacturing Science for Inside and Oversea Young Scholars and The Third S. M. Wu Symposium on Manufacturing Science, Wuhan, P.R. China, June 1998.

 

 


Indiana University-Purdue University Indianapolis

723 West Michigan Street, SL 260 Indianapolis, IN 46202-5132

Phone: 317 274-9717
Fax: 317 274-9744

 

Lab Faculty



[ AEML Mission | People | Training | Research | Publications | Projects | Facilities | Products | Links ]

  » Return to Mechanical Engineering Home

  This website was designed to be viewed in Microsoft Internet Explorer 6.0.

  Questions or comments regarding this site to: Webmaster
  Purdue School of Engineering and Technology, IUPUI, email etinfo for more information.

 
Copyright© 1999-2003 Purdue School of Engineering and Technology, IUPUI