IUPUI School of Engineering and Technology

Advanced Nanomaterials and Nanomanufacturing

Peer-Reviewed Journals

[28] TruongVo, ThucNhi; Kennedy, Rachelle; Chen, Hao; Berndt, Aaron; Agarwal, Mangilal; Zhu, Likun; Nakshatri, Harikrishna; Wallace, Joseph; Na, Sungsoo; Yokota, Hiroki; Ryu, Jong, “Microfluidic Channel for Characterizing Normal and Breast Cancer Cells,” J. Micromech. Microeng. (2017)

[27] Cao, Y., Huang, J., Peng, X., Cao, D., Galaska, A., Qiu, S., Liu, J., Khan, M.A., Young, D.P., Ryu, J.E., Feng, H., Yerra, N., Guo, Z.,"Poly (vinylidene fluoride) derived fluorine-doped magnetic carbon nanoadsorbents for enhanced chromium removal," Carbon, 115, pp. 503-514 (2017)

[26] X. Hopkins, W. Gill, R. Kringel, G. Wang, J. Hass, S. Acharya, J. Park, I.-T. Jeon, B.H. An, J. Lee, J. Ryu, R. Hill, D. McIlroy, Y.K. Kim, D. Choi, “Radio frequency hyperthermia for destruction of pancreatic tumors using nickel-gold core-shell nanowires,” Nanotechnology, 28, 03LT01 (2017)

[25] A. Mosey, Babu Ram Gaire , Jeongwhan Kim , Jong Eun Ryu , Ruihua cheng, "Tunable cobalt nanoparticle synthesis by intense pulse flash annealing," AIP Advances, 7, pp. 056308 (2017)

[24] W. Gill, D. Ali, D. Choi, J. Park, J. Ryu, Y.K. Lee, "3 Dimensional-Printed Micro-Container with Graphene Current Collector and Manganese Oxide Thin-Film as Cathodes of Li-Batteries," Nanosci. Nanotechnol. Lett. 8, pp. 1095–1098 (2016)

[23] T. Espich, E. Salcedo, A. Kulkarni, D. Choi, J. Ryu, "Scalable Nanoparticle Assembly on Carbon Nanotubes using Flash Induced Dewetting," Journal of Composite Materials (2016), DOI: 10.1177/0021998316682310

[22] J. Kim, A. Shankar, J. Zhu, Z. Guo, D. Choi, J.E. Ryu,"Reinforcement of Cu Nanoink Sintered Film with Extended Carbon Nanofibers for Large Deformation of Printed Electronics," Journal of Composite Materials (2016), DOI: 10.1177/0021998316656394

[21] D. Choi, B.H. An, M. Mansouri, D. Ali, M. Khalil, K. Xu, D. Nwoke, J.R. Park, A. Shankar, J.E. Ryu,"Micro-Capacitor with Vertically Grown Silver Nanowires and Bismuth Ferric Oxide Composite Structures on Silicon Substrates," Journal of Composite Materials (2016), DOI: 10.1177/0021998316656767

[20] S. Ota, S. Wang, J. Ryu, Y. Wang, Y. Chen, X. Zhang, “Intracellular delivery of top-down fabricated tunable nano-plasmonic resonators,” Nanoscale, 5, 10179-10182, 2013 (link)

[19] X. Zhang, J. Zhu, N. Haldolaarachchige, J. Ryu, D. Young, S. Wei, Z. Guo, “Synthetic Process Engineered Polyaniline Nanostructures with Tunable Morphology and Physical Properties,” Polymer, Vol 53, pp. 2109 - 2120, 2012 (link)

[18] J. Zhu, X. Zhang, N. Haldolaarachchige, Q. Wang, Z. Luo, J. Ryu, D. P. Young, S. Wei, Z. Guo, “Polypyrrole Metacomposites with Different Nanostructures,” Journal of Materials Chemistry, Vol. 22, pp. 4996 - 5005, 2012 (link)

Graphical abstract: Polypyrrole metacomposites with different carbon nanostructures

[17] J. Ryu, H.S. Kim, H.T. Hahn, “Reactive sintering of copper nanoparticles using intense pulsed light,” Journal of Electronic Materials,Vol. 40, pp. 42-50, 2011 (link)

[16] J.S. Kang, J. Ryu, H.S. Kim, H.T. Hahn, S. Jang, J.W. Joung, “Sintering of inkjet printed silver nanoparticles at a room temperature by using the intense pulsed light,” Journal of Electronic Materials, Vol 40, pp. 2268-2277, 2011 (link)

[15] S. Wang, S. Ota, B. Guo, J. Ryu, C. Rhode, Y. Xiong, S. Kalim, L. Zeng, Y. Chen, M. Teitell, X. Zhang, “Subcellular Resolution Mapping of Endogenous Cytokine Secretion by Nano-Plasmonic-Resonator Sensor Array,” Nano Letters, Vol. 11, pp. 3431-3434, 2011 (link)

[14] H.S. Kim, J. Huh, J. Ryu, “Investigation of moisture induced delamination failure in a semiconductor package via multi-scale mechanics,” Journal of Physics D: Applied physics, Vol. 44, pp. 034007, 2011 (link)

[13] Z. Guo, J. Zhu, S. Wei, L. Zhang, Y. Mao, J. Ryu, N. Haldolaarachchige, A. Karki, D. Young, “Polyaniline-tungsten oxide metacomposites with tunable electronic properties,” Journal of Materials Chemistry, Vol. 21, pp. 342-348, 2011(link)

[12] J. Zhu, S. Wei, L. Zhang, Y. Mao, J. Ryu, N. Haldolaarachchige, D. Young, Z. Guo, “Electrical and dielectric properties of polyaniline–Al2O3 nanocomposites derived from various Al2O3 nanostructures,” Journal of Materials Chemistry, Vol. 21, pp. 3952-3959, 2011 (link)

[11] Y. Li, J. Zhu, S. Wei, J. Ryu, L. Sun, Z. Guo, “Poly(propylene)/Graphene Nanoplatelets Nanocomposites: Melt Rheological Behaviors and Thermal, Electrical and Electronic Properties,” Macromolecular Chemistry and Physics, Vol. 212, pp. 1951-1959, 2011(link)

[10] J. Zhu, S. Wei, J. Ryu, Z. Guo, “Strain Sensing Elastomer/Carbon Nanofibers ‘Metacomposites’,” Journal of Physical Chemistry C, Vol. 115, pp. 13215-13222, 2011 (link)

[9] Y. Li, J. Zhu, S. Wei, J. Ryu, Q. Wang, L. Sun, Z. Guo, “Poly(propylene) Nanocomposites Containing Various Carbon Nanostructures,” Macromolecular Chemistry and Physics, Vol 212, pp. 2429 – 2438, 2011 (link)

[8] J. Ryu, H.S. Kim, H.T. Hahn, D. Lashmore, “Carbon nanotubes with platinum nano-islands as glucose biofuel cell electrodes,” Biosensors and Bioelectronics, Vol.25, pp. 1603-1608, 2010 link

[7] J. Ryu, K.H. Kim, H.S. Kim, H.T. Hahn, D. Lashmore, “Intense pulsed light induced platinum-gold alloy formation on carbon nanotubes for non-enzymatic glucose detection,” Biosensors and Bioelectronics, Vol.26, pp. 602-607, 2010 link

[6] J. Ryu, H.S. Kim, S.E. Lee, H.T. Hahn, D. Lashmore, “Carbon nanotube mat as mediator-less glucose sensor electrode,” Journal of Nanoscience and Nanotechnology, Vol.10, pp. 941-947, 2010 link

[5] J.S. Kang, H.S. Kim, J. Ryu, H.T. Hahn, S.H. Jang, J.W. Joung, “Inkjet printed electronics using copper nanoparticle ink,” Journal of Materials Science: Materials in Electronics, Vol. 21, pp. 1213-1220, 2010 link

[4] J. Zhu, S. Wei, J. Ryu, L. Sun, Z. Luo, Z. Guo, “Magnetic epoxy resin nanocomposites reinforced with core-shell structured Fe@FeO nanoparticles: fabrication and property analysis,” ACS Applied Materials & Interfaces, Vol.2, pp. 2100-2107, 2010 link

[3] J. Zhu, L. Zhang, Y. Mao, P. Mavinakuli, D. Young, Z. Guo, S. Wei, J. Ryu, A. Karki, “Conductive polypyrrole/tungsten oxide metacomposites with negative permittivity,” Journal of Physical Chemistry C, Vol. 114, pp. 16335-16342, 2010 link

[2] J. Zhu, S. Wei, J. Ryu, M. Budhathoki, G. Liang, Z. Guo, “In-situ stabilized carbon nanofibers (CNFs) reinforced epoxy nanocomposites,” Journal of Materials Chemistry, Vol.20, pp. 4937-4948, 2010 link

[1] J. Ryu, D. Dehlinger, M.J. Heller, H.T. Hahn, “Electrophoretic layer-by-layer assembly of biotin/avidin functionalized nanoparticles,” Particle and Particle System Characterization, Vol.26, pp. 275-282, 2009 link

 

Conference Proceedings

[5] A. Mosey, Babu Ram Gaire , Jeongwhan Kim , Jong Eun Ryu , Ruihua cheng, "Tunable cobalt nanoparticle synthesis by intense pulse flash annealing," THE 61ST MMM CONFERENCE, Oct 31 - Nov 4, New Orleans, Louisiana.

[4] Rizkalla, M., Ryu, J. E., Suryadevara, V. K., & Tschudy, J. (2015, June). Interfacing nanoparticles to CMOS quad instrumentation amplifiers for gas sensing devices. In 2015 National Aerospace and Electronics Conference (NAECON) (pp. 237-241). IEEE.

[3] H.S. Kim, J. Ryu, H. T. Hahn, “Investigation of CNT with Pt nano-bump composite as sugar fuel cell electrodes,” The Korean Society for Composite Materials Fall Meeting, 2010

[2] J. Ryu, T. Saotome, H.T. Hahn, D. Lashmore, “Carbon nanotube mat biocomposite for enzymatic glucose/O2 biofuel cell,” ANTEC 2009 proceeding, Society of Plastics Engineers, pp. 530 – 534, 2009

[1] J. Ryu, H.S. Kim, H.T. Hahn, D. Lashmore, “Mediator-less glucose biosensor based on carbon nanotube mat,” 23rd Technical conference proceeding, American Society of Composites, 2008

 

Conference Presentation and Poster

[10] Boram Oh, Jeonghwan Kim*, Deok-Kee Kim, Jong Eun Ryu, Jun Oh Kim, Augustine Urbas, Zahyun Ku and Sang Jun Lee, Stacked 1D subwavelength gratings for improved mid-IR polarization extinction ratio,” The 18th International Synposium on the Physics of Semiconductors and Applications, July 3 ~ 7, 2016, Jeju, Korea

[9] “3-Dimensional Designed Novel Substrate for Flexible Hybrid Electronics” by Eduardo Salcedo*, Aaron Berndt*, Akash Shankar, and Jong E Ryu, Flex 2016, Monterey CA

[8] T. TruongVo, R. Kennedy, H. Chen, M. Agarwal, L. Zhu, H. Nakshatri, S. Na, H. Yokota, J. Ryu, “Microfluidic Channel for Characterizing Breast Cancer Cells,” The Amelia Project Giving Wings to Research, Kokomo, IN, March 12, 2016 (Poster presentation)

[7] T. Goel, M. Rizkalla, J. Ryu and V. K. Suryadevara, "Interfacing Nanoparticles to CMOS Quad Instrumentation Amplifiers for Gas Sensing Devices," National Aerospace Electronics Conference, June 16 - June 19, 2015

[6] D. Wyman, J. Kim, A. Shankar, Z. Xu, S. Shrestha, S. Mou, J. Myers, A. Sarangan, J. Ryu, "Scalable Manufacturing of Tunable Graphene Plasmonic Resonators for Infrared Absorption," 2015 IUPUI INDI Symposium, Indianapolis, IN (poster)

[5] A. Kulkarni, J. Kim, X. Yan, J. Ryu, Z. Guo, I. Seok, “Au Nanoparticle Assembly on Carbon Nanotubes using Flash Induced Solid State Dewetting,” MRS Spring Meeting, 2015 (poster)

[4] D. Wyman, W. A. Gill, B.-H. An, J. Ryu, D.S. Choi, “Synthesis of Copper Nanostructures on 3-Dimensional Printed Polymer Substrates,” MRS Spring Meeting, 2015 (poster)

[3] J. Ryu, T. Saotome, H.T. Hahn, D. Lashmore, “Carbon nanotube mat biocomposite for enzymatic glucose/O2 biofuel cell,” ANTEC 2009, Chicago, USA, June 2009

[2] J. Ryu, H.T. Hahn, D. Lashmore, “Mediator-less glucose sensor based on carbon nanotube mat electrode,” US-Korea Conference, San Diego, USA, Aug. 2008

[1] J. Ryu, H.S. Kim, H.T. Hahn, D. Lashmore, “Mediator-less glucose biosensor based on carbon nanotube mat,” ASC 23rd Technical Conference, USA, Sept. 2008

 

Invited Talk

5. "Printed Materials and Manufacturing," Boise State University, Oct 26, 2016

4. “Advanced Manufacturing for Flexible Electronics and Nanomaterials,” AFRL Materials and Manufacturing Directorate Seminar, July 29, 2015

3. “Scalable Nanomanufacturing and Biomedical Applications – Nanoimprint and Photo-thermal Self Assembly,” Khalifa University and Masdar Institute of Science and Technology, UAE, Dec 2014

2. “Nano Manufacturing for Flexible Substrates,” Department of Physics Colloquium, IUPUI, Feb. 2014

1. “Nanofabrication on Polymeric Substrates for Energy Harvest Structures and Biological Applications,” Department of Materials Science and Engineering at the University of Idaho, Moscow, April 2010